Threadless piercing systems are becoming very popular because of the ease in which you can change the ends of your piercings. You can mix and match the ends without removing the post and the post itself has no external thread which can catch on the piercing when you first push it through.
The removable end has a small pin which is very slightly bent by yourself to suit your required tightness of fitting. When inserted into the post, the curvature between the pin and the inside of the shaft creates spring tension, holding the end securely in place. It works really well.
You don't need to bend the pin very much for a secure fit. Start by making very small bends, you can always bend it some more until you can feel the fit is secure. The bigger the bend, the tighter the fit. If you over bend the pin it could make the fit too tight and difficult to remove from the shaft.
To remove the end you simply pull it out or if you have made the fit very tight then apply a slight twist as you pull. You now have a simple push fit system which is really secure and really easy to change the ends.
All our threadless piercings are made to the industry standard sizing and is interchangeable with similar products on the market. All ends can be used with all different posts no matter what the size of the post.
We have introduced a range of solid 925 silver ends to fit threadless posts. Our posts are made from implant grade titanium and PTFE bioplastic which is more suitable for piercings around the mouth.
View our range of Threadless Piercings